Menu

Accessories

View as Grid List
Sort by

Trijicon RMR Sight Adjustable (LED) - 3.25 MOA Red Dot RM06

$725.00 $625.00
Developed to improve precision and accuracy with any style or caliber of weapon, the Trijicon RMR (Ruggedized Miniature Reflex) is designed to be as durable as the legendary ACOG. The RM06 is an LED sight powered by a standard CR2032 battery. Housed in rugged forged aluminum, the RMR is extremely tough yet lightweight. New easy-to-use adjusters with audible clicks allow for quick windage and elevation adjustments. With eight available brightness settings, the reticle can be manually adjusted by pressing the plus or minus buttons on either side of the unit. To switch to auto adjust mode simply press both buttons simultaneously and release. To save battery life, turn the optic off by pressing both buttons simultaneously and holding for 3 seconds. The Trijicon RMR is tougher than any alternative and suitable for military, law enforcement and hunting applications.

2A BALIOS-LITE 556NATO RECEIVER SET

$520.00
With weight saving as the prime objective, 2A-Armament set out to build a lightweight solution for those looking for a solid platform to build on. The BALIOS-lite has all the same great features and aesthetics as our standard BALIOS sets, but incorporates a significant weight reduction. The BALIOS-lite is perfect for those who participate in 3-gun, hunting, or any other shooting activity where weight is a concern. Both the upper and lower receivers are equally at home on a standard forged product from other vendors. The flared magazine well aids in rapid reloading, and the tapered transition under the charging handle prevents associated wear patterns from damaging the finish. We have eliminated the forward assist, and retained the port door cover on the upper receiver.

2A Lightweight Adjustable Bolt Carrier Group

$419.00
The Regulated Bolt Carrier (RBC) is a lightweight carrier with a gas regulating gate built into the carrier itself. This provides a drop in, lightweight solution for those looking to tune your AR-15's gas system. It eliminates the need for adjustable gas blocks, and allows the firearm to be restored to a factory full weight system by simply swapping your full-mass carrier back into your firearm. The RBC has infinite adjustment from fully open, to fully closed on the regulating gate. The RBC can be tuned to most combinations of buffers, springs, suppressors, and barrel lengths. The RBC Is fully adjustable through the port door, and does not require the firearm to be broken down for adjustment!

2A BL-RAIL KMOD 12"

$227.00
The 2A Armament™ BL RAIL KEYMOD series was designed as a lightweight rail solution utilizing proven traditional 6061 extrusion, and titanium as the foundation. The BL RAIL series of rails features the same lightening cuts found on the popular BALIOS-lite receiver sets. When the two are combined, a seamless look is achieved across the top of the firearm. The BL RAIL is just as capable on any quality forged or billet upper receiver offered from other manufacturers as well. By utilizing a titanium barrel nut, and an innovative 45 degree mounting system, the BL RAIL achieves a solid lockup with the upper receiver. The 2A Armament BL RAIL will ship with a 6AL-4V titanium barrel nut. An optional aluminum barrel nut is offered as a separate item for those looking to save maximum weight on a build.

2A BL-RAIL M-LOK 12"

$227.00
2A BL-RAIL M-LOK The 2A Armament™ BL RAIL M-LOK series was designed as a lightweight rail solution utilizing proven traditional 6061 extrusion, and titanium as the foundation. The BL RAIL series of rails features the same lightening cuts found on the popular BALIOS-lite receiver sets. When the two are combined, a seamless look is achieved across the top of the firearm. The BL RAIL is just as capable on any quality forged or billet upper receiver offered from other manufacturers as well. By utilizing a titanium barrel nut, and an innovative 45 degree mounting system, the BL RAIL achieves a solid lockup with the upper receiver. The 2A Armament BL RAIL will ship with a 6AL-4V titanium barrel nut. An optional aluminum barrel nut is offered as a separate item for those looking to save maximum weight on a build.

Blacklist Ultra Match G17 Barrel THREADED

$214.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

Blacklist Ultra Match G19 Barrel THREADED

$214.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

Blacklist Ultra Match G43 Barrel THREADED

$214.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

Blacklist Ultra Match G26 Barrel THREADED

$214.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

Blacklist Ultra Match G26 Barrel NON-THREADED

$204.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

Blacklist Ultra Match G34 Barrel NON-THREADED

$204.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

Blacklist Ultra Match G43 Barrel NON-THREADED

$204.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

Blacklist Ultra Match G17 Barrel NON-THREADED

$204.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

Blacklist Ultra Match G19 Barrel NON-THREADED

$204.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

S3F Solutions Glock 19 Drop in Match Barrel FLUTED/THREADED

$180.00
At S3FSolutions, we always say “Accuracy Matters”, and we mean it. Our mission, simply stated, is to bring barrels to our customers, that are higher quality, more consistent, and cost a fraction of the price. We accomplish this by putting every barrel through a rigorous quality control process; to ensure each barrel is as close to mathematically symmetrical as possible, and meets SAAMI (Sporting Arms and Ammunition Manufacturers’ Institute) specifications. These fully supported chambers are spec’d for shooting either factory or reloaded ammunition, and are ready to be dropped into your gun and run! We are confident you will be satisfied with your new S3F barrel, because thousands of shooters, from Pro to recreational already are!

AGENCY ARMS BONESAW AUTHORIZATION FEE

$150.00
Note: This is the ONLY way to order the "Bonesaw" cuts on a CUSTOMER SUPPLIED gun through Agency Arms. We are accepting Authorization Fee's for Agency Arms to gunsmith a customer supplied Glock pistol finished in the Reactive Gunworks exclusive "Bonesaw" cut. ​ Customer Supplied Process: 1) Pay the "Bonesaw Authorization Fee" to Reactive Gunworks (each fee entitles you to the design rights for 1 pistol) 2) Using your Order Confirmation code from Reactive Gunworks, place your Bonesaw order directly with Agency Arms and pay the required 50% deposit (at www.AgencyArms.com) 3) Mail your Glock directly to Agency Arms (you will receive shipping instructions directly from Agency) 4) Upon completion of the gunsmithing by Agency Arms, pay the remaining balance due and Agency Arms will return ship your firearm. How long will it take? Build Times are provided by Agency Arms and are based off Demand. Not available on subcompact (ie.G42/43) or long slide (ie.G34/17L) or large

Trijicon HD XR Night Sights GLOCK

$150.00
With the challenges of the changing landscape in law enforcement comes the next evolution of the Trijicon Night Sight line. Building on the features of the current HD™ Night Sights, the Trijicon HD XR™ night sights are for the next level of advanced target identification and engagement at increased distances. A thinner front sight post allows shooters to have a larger field of view which further enhances the ability to identify targets, expedite engagements and see location of hits on target at longer distances. Pistol shooters that need the advantage of a more precise engagement in any light can count on the Trijicon HD XR™ Night Sights.

Inforce APLc Glock Weapon Light

$150.00
IN STOCK AND READY TO SHIP

Trijicon SUPRESSOR Night Sights GLOCK

$145.00
Trijicon Bright & Tough™ Suppressor Night Sights are three-dot tritium iron sights that allow shooters the ability to line up their sights in both bright and low-light situations. While standard height sights do not provide an aiming solution when using a suppressed firearm, the additional height of suppressor night sights will clear the added height of a suppressor, allowing shooters the ability to line up their sights on target. Additionally, suppressor night sights can be used as back up iron sights with the Trijicon RMR®. Green tritium lamps are warranted for 12 years from date of manufacture.​

Trijicon HD Night Sights GLOCK

$135.00
The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. Green tritium lamps are warranted for 12 years from date of manufacture.​

STRMLGHT PROTAC HL-X RAIL MOUNT

$200.00 $120.00
Streamlight, ProTac, 2L, Mount, Remote Switch, Black

S3F Solutions Glock 21 Drop in Match Barrel FLUTED

$100.00
At S3FSolutions, we always say “Accuracy Matters”, and we mean it. Our mission, simply stated, is to bring barrels to our customers, that are higher quality, more consistent, and cost a fraction of the price. We accomplish this by putting every barrel through a rigorous quality control process; to ensure each barrel is as close to mathematically symmetrical as possible, and meets SAAMI (Sporting Arms and Ammunition Manufacturers’ Institute) specifications. These fully supported chambers are spec’d for shooting either factory or reloaded ammunition, and are ready to be dropped into your gun and run! We are confident you will be satisfied with your new S3F barrel, because thousands of shooters, from Pro to recreational already are!

AXTS Raptor Charging Handle 5.56

$85.00
AXTS Weapons Systems, Raptor Charging Handle, 5.56MM, Black Finish

Vickers Elite Battlesight for Glock, Black Serrated

$49.95
The high profile Vickers Elite Battlesight rear has a .145” wide, deep U-Notch for optimum sighting in low-light, dynamic range conditions and is a perfect match to our .125” wide front sights. The concave non-reflective rear blade is serrated 40 lines per inch, while the notch area is recessed into a semi-circular pocket for a crisp, protected sight picture. Two hardened set-screws ensure this sight will never shoot loose under the most demanding conditions. This snag-free rear sight also has a shelf shape that enables one-hand slide cycling or malfunction clearance and a rugged, non-reflective matte black parkerized finish. The Vickers Elite Battlesight is available with single dot Tritium and plain black serrated rear blades and your choice of black serrated, green/red fiber optic, tritium and genuine, never dulling gold bead front sight styles. The high profile of the Vickers Elite Battlesight allows the use of a taller front sight and deeper rear notch for better sight tracking during high speed shooting situations. Once you try this sight system you will be convinced that the Vickers Elite Battlesight is the best performance upgrade you can make to your Glock® pistol! Larry Vickers is a retired US Army 1st SFOD- Delta combat veteran with years of experience in the firearms industry as a combat marksmanship instructor and industry consultant. Find out more about Larry Vickers on his website www.vickerstactical.com NOTE: Sights may require minor fitting and may not be returned after installation. The Vickers Elite Glock® Sight set requires the use of a .245”tall front sight for all caliber Glock® pistols except for .45 ACP and 10mm which will typically require the .230” front sight. Sights may require minor fitting and may not be returned after installation. These front sights are taller than factory Glock® and not compatible with standard factory rear sights without adjusting the sight height. Wilson Combat Vickers Glock® rear sights are not compatible with factory Glock® MOS (Modular Optic System) slide models due to the rearward relocation of the sight dovetail position. Glock Rear Sight Installation FAQ Remove the magazine and make sure your pistol is unloaded. Remove and Field strip slide assembly and secure the slide in a padded vise. Remove existing rear sight with hammer and punch. Clean rear sight dovetail and press in new rear sight from right to left. If rear sight will not start into approximately 50% of the dovetail you may need to remove very small amounts of material from the bottom and sides of the dovetail portion of the rear sight-usually just a few light passes will do. A safe sided dovetail file, small diamond hone or sanding stick are good tools for this. Go slowly and check your fit. Once you are able to get 50% of the sight base into the dovetail attempt to tap the sight in place with a hammer and non marring punch/dowel (wood, polymer, aluminum) or appropriate sight pusher. If using a steel or brass punch protect the sight/punch with several layers of duct tape. Fine adjust your windage with a rear sight armorers tool or non marring punch. After you fine adjust rear sight windage install dual locking screws with a threadlocking compound like Loctite on the threads. Note-if the rear sight is loose in the dovetail your dovetail is cut oversize and the new rear sight may require peening on the edges of the dovetail for a proper fit.

Ameriglo TRGT COMP SIGHTS

$40.00
AmeriGlo, Special Combination Sight, Fits Glock 17/19/22/23, Red Fiber Front and Black Rear

Vickers Elite Snag Free Front Sight for Glock, Green Fiber Optic, .230"

$39.95
Snag Free Front Sight, Green Fiber Optic, Vickers Elite for Glock® .230” .230” height .125" wide Green Fiber optic (.0585" Diameter) Glock® Vickers Elite replacement front sight for .45 ACP and 10mm calibers Black Parkerized finish Note: .The Vickers Elite Glock® Sight set requires the use of a .245” tall front sight for all caliber Glock® pistols except for .45 ACP and 10mm which will typically require the .230” front sight. Sights may require minor fitting and may not be returned after installation. These front sights are taller than factory Glock® and not compatible with standard factory rear sights without adjusting the sight height. Replacement fiber optic rods found here: http://shopwilsoncombat.com/Fiber-Optic-Rod-Replacement-Green-0585-x-1/productinfo/583G/ Glock Front Sight Installation FAQ Remove the magazine and make sure your pistol is unloaded. Remove and field strip slide assembly. Remove Glock factory front sight with a punch or pliers. Gen-4 Glock pistols will require a front sight tool to remove the front sight retaining screw. After removal of front sight clean and degrease sight hole in slide and check the fit of the new front sight. If the new sight will seat at least 50% tap it in place with a non marring punch taking care that it remains straight. If the sight will not seat you may have to sand or lightly file the circumference of the front sight base. Install with aftermarket Glock front sight tool or 3/16” socket that has been modified to clear the slide. For a more permanent installation use red loctite around the circumference of the sight base. Reassemble your pistol and make sure sight retaining screw is not impeding operation.

Vickers Elite Snag Free Front Sight for Glock, Green Fiber Optic, .245"

$39.95
Snag Free Front Sight, Green Fiber Optic, Vickers Elite for Glock® .245” .245” height .125" wide Green Fiber optic (.0585" Diameter) Glock® Vickers Elite replacement front sight for 9mm, .40, 357 and .45 GAP calibers Black Parkerized finish Note: .The Vickers Elite Glock® Sight set requires the use of a .245” tall front sight for all caliber Glock® pistols except for .45 ACP and 10mm which will typically require the .230” front sight. Sights may require minor fitting and may not be returned after installation. These front sights are taller than factory Glock® and not compatible with standard factory rear sights without adjusting the sight height. Replacement fiber optic rods found here: http://shopwilsoncombat.com/Fiber-Optic-Rod-Replacement-Green-0585-x-1/productinfo/583G/ Glock Front Sight Installation FAQ Remove the magazine and make sure your pistol is unloaded. Remove and field strip slide assembly. Remove Glock factory front sight with a punch or pliers. Gen-4 Glock pistols will require a front sight tool to remove the front sight retaining screw. After removal of front sight clean and degrease sight hole in slide and check the fit of the new front sight. If the new sight will seat at least 50% tap it in place with a non marring punch taking care that it remains straight. If the sight will not seat you may have to sand or lightly file the circumference of the front sight base. Install with aftermarket Glock front sight tool or 3/16” socket that has been modified to clear the slide. For a more permanent installation use red loctite around the circumference of the sight base. Reassemble your pistol and make sure sight retaining screw is not impeding operation.

2A AR-15 Titanium Takedown Pins

$38.00
The 2A Armament™ Titanium takedown pin set features a through drilled design for maximum weight savings in a standard .250 pin size. The head of each pin also incorporates a pocketed feature to reduce weight. Each pin is machined with a single operation on our 8-Axis CNC Machines for true concentricity, and consistency. Using certified U.S.A. 6AL-4V Titanium these pins weigh in at 0.18 oz total for both pins combined. The 2A Armament titanium takedown pins are aesthetically pleasing on both our BALIOS-lite receiver sets, as well as other vendors product.

Agency Arms Pistol Case

$25.00
Lockable case that fits inside of the Glock OEM Case.

Trijicon RMR Mounting KIT for Glock Pistols

$19.00
This is the Trijicon MOS kit that is used to mount an RMR properly to any Agency Arms, Salient Arms, or Fowler Industries pistol with an RMR cutout. It includes a thin metal sealing plate, and (2) correct length screws plus allen wrench.

Filter by:

Clear All

Filter by