Menu

All Products

View as Grid List
Sort by

L3 Light Weapon Thermal Sight (LWTS)

$15,099.00 $9,800.00

Description

The Light Weapon Thermal Sight (LWTS) is an extremely versatile thermal imaging solution.  This clip-on system mounts in front of your day optics and allows you to view your reticle over the thermal image.  In addition, it can be used as a handheld observation tool or mounted by itself as a stand-alone weapon sight.  The thermal imaging capability of the LWTS allows for long-wave infrared observation and target identification under adverse conditions including, light rain, smoke, light snow and low light to total darkness.

  • 640x480 17 micron resolution
  • Real-time video in/out for remote viewing
  • Image and video capture for download to PC

Leupold MARK 8 3.5-25x56 35MM M5C2 TRMR3

$4,419.99 $3,995.00
The utmost in premiere riflescope precision, and flexibility: the Leupold® Mark 8 3.5-25x56 Non-Illuminated provides serious shooters the features necessary for success at any distance. The Mark 8’s wide 8X zoom range offers an incredible field-of-view at lower magnifications, and excellent long-range target discrimination at higher powers. The 56mm objective and locking fast focus eyepiece yields a forgiving eyebox throughout the entire zoom range, while front focal plane reticles allow for accurate ranging and shot correction at any magnification. The new M5C2 ZeroLock, 1/10th mil per click windage and elevation adjustment eliminates accidental movement in the field. The elevation dial features a two turn zero-stop with a tactile revolution indicator providing 20 mils of travel (10 mils per revolution) and eliminates under or over rotating the dial. It is the ultimate blend of versatility, rugged durability, and long range precision.

Modern Outfitters MC6 .224 Valkyrie Distressed OD

$2,999.00
When designing the MC6 Modern Carbine™, we had various missions that we set out to accomplish. Our primary goals were to use the highest grade materials available and the most precise manufacturing processes. We also wanted to design a rifle that was lightweight, accurate, and extremely reliable in the most adverse conditions. With the MC6, we believe that we accomplished these missions. Depending on the configuration, the MC6 weighs in at or under 6.0 pounds and has solid billet CNC machined construction for tighter tolerances and increased accuracy. Standard features on all MC6's include enhanced controls, our sub-MOA guaranteed barrels, customer's choice of a solid Cerakote color, premium padded rifle cases, and a suppressor-ready mount.

TRI-11 Double Stack Cobalt Short Dust Cover

$2,989.00

The TRI-11 is a modern take on the timeless 1911. It is a single action action double stack pistol. The TRI-11 offers the 1911 package with increased capacity. Each of our TRI-11's are hand fitted for precise tolerances and tuned to provide a smooth and reliable action, with superior recoil management, and increased longevity. These pistols are functional works of art that will push forward for generations.

Each of our Single Action Only are built on the trusted platform from certified American steel using all billet steel components. Our match grade barrels are hand fitted and feature patented TRACK rifling with a thick barrel bushing. Our armorers take time to meticulously hand fit each slide to frame in order to achieve our tolerance standards for the smoothest operating action possible. Every SAO pistol features polished feed ramps, light weight hammers, ambidextrous safety, and fiber optic front sight with ledge rear sight.

The Triarc Tri-11 and 1911 series pistols are crafted with the finest components available by some of the most experienced pistolsmiths in the industry. We use only billet steel components machined from either 4140 chrome moly or 416 R stainless stock. We source parts from the most reliable vendors know for the quality of their products, such as Dawson Precision, EGW, Ed Brown, 10-8, X-line, Tripp Research, Wolff Gunsprings, VZ Grips and more. Our Tri-11 pistols are compatible with many aftermarket components designed for use with STI 2011 style pistols such as magazines, mag catches, extended mag wells, mainspring housings and triggers. Each pistol is shipped with 2 mags and a pelican hard case. Trigger weights are set to 3-3.5lb. Pistols are available with either 5” Government or 4.3” Commander length barrels. Commander size pistols are compatible with Colt Commander style recoil system components for ease of maintenance and customization to specific loads.

Agency Arms 34 G3 Arctic Multicam 2-Tone BONESAW EDC

$2,774.00 $2,674.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 17 G3 Urban Grip Chop 2-Tone Arctic Multicam

$2,564.00 $2,464.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 34 G4 Urban DTF Multicam

$2,509.00 $2,409.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 19 G4 Hybrid Multicam 2-Tone

$2,494.00 $2,394.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 17 G5 Bonesaw DTF DLC

$2,399.00 $2,299.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 17 G4 OD Frame Bonesaw 2-Tone

$2,364.00 $2,264.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 17 G3 Bonesaw Grip Chop DLC EDC DTF

$2,349.00 $2,249.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 17 G4 OD BONESAW JARVIS DLC

$2,324.00 $2,224.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 19 G5 Hybrid DTF DLC

$2,299.00 $2,199.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 17 G4 GREY 2-Tone

$2,289.00 $2,189.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 34 G3 Urban DLC

$2,279.00 $2,179.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 34 G4 Urban DLC

$2,279.00 $2,179.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 19 G4 URBAN Multicam Bronze

$2,279.00 $2,179.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 19x Urban DLC

$2,250.00 $2,150.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 19x Urban DLC

$2,250.00 $2,150.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 19x Field DLC

$2,250.00 $2,150.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 19x Hybrid DLC

$2,250.00 $2,150.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 22/17 Grey Frame Urban SS

$2,429.00 $2,150.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 19 G4 Green Frame Bonesaw

$2,249.00 $2,149.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 17 G4 Urban BW Burnt Bronze

$2,249.00 $2,149.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

TRIARC Glock 34 V2

$2,200.00

Obtaining the greatest accuracy for target shooting was the main reason for the development of the GLOCK 34 which has an extended barrel, greater slide dimensions, and unmatched reliability in a 9x19mm pistol. This highly accurate pistol has found widespread use as a competitive pistol for USPSA, IDPA, IPSC, GSSF and other sport shooting organizations.

We have advanced the Glock 34 by improving the slide, grip texture, trigger internals and adding other accessories to provide a more balance and comfortable firearm. Our fine tuning and customization options allow us to optimize the Glock platform for the end user.

Agency Arms 19 G5 Field DLC

$2,199.00 $2,099.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 26 G 4 Tungsten

$2,199.00 $2,099.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 17 G3 OD Urban DLC Barrel

$2,188.00 $2,088.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms TWF Hybrid Crushed Silver SS Barrel

$2,170.00 $2,070.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 19 G4 Green Frame Urban DTF DLC

$2,149.00 $2,049.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 26 G4 Green Frame DLC

$2,149.00 $2,049.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 17 G4 Dark Earth Urban DLC

$2,149.00 $2,049.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms M&P 9 DLC

$2,119.00 $2,019.00
Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group. Slide Work All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. Frame work We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms M&P 2.0 Urban DLC

$2,099.00

Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group.

 

Slide Work

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol.

 

Frame work

We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms 26 G3 BONESAW EDC DLC

$2,099.00 $1,999.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 26 G3 Bonesaw DLC

$2,099.00 $1,999.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Modern Outfitters Carbine MC5 Extreme Distressed Tungsten

$2,099.00
While the MC5 is the entry level of the Modern Carbine™ line, it is still packed full of features. When designing the MC5 Modern Carbine™, we had various missions that we set out to accomplish. Our primary goals were to use the highest grade materials available and the most precise manufacturing processes. We also wanted to design a rifle that was lightweight, accurate, and extremely reliable in the most adverse conditions. The average MC5 configuration weighs in around 6.5 pounds or less. Built from a forged upper and lower AR-15 receiver with a standard barrel nut interface and mil-spec controls; The MC5 is made for abuse and high round counts. Standard features on all MC5's include our sub MOA guaranteed barrels, enhanced buffer system, enhanced gas system, customer's choice of a solid Cerakote color, Modern Carbine™ box with manual and magazine, and our lifetime warranty.

Agency Arms M&P 2.0 Urban DLC

$2,099.00

Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group.

 

Slide Work

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol.

 

Frame work

We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms 17 G3 Hybrid DLC

$2,099.00 $1,999.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 26 G3 Hybrid EDC DLC

$1,999.00 $1,899.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 26 G3 Hybrid EDC Stipple DLC

$1,999.00 $1,899.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms M&P Shield Hybrid DLC

$1,849.00

Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group.

 

Slide Work

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol.

 

Frame work

We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms M&P FDE Shield Field DLC

$1,849.00

Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group.

 

Slide Work

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol.

 

Frame work

We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms M&P FDE Shield Hybrid DLC

$1,849.00

Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group.

 

Slide Work

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol.

 

Frame work

We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

MAXFLO 3D AFD SUPPRESSOR 9MM

$995.00
NEXGEN2 Defense (NG2) has brought new suppression technology to the market with their MAXFLO 3D™. Utilizing “Advanced Flow Dynamics™ (AFD)” Zero Back-Pressure Suppression™ technology. The MAXFLO 3D rewrites the rules in firearms suppression. Rather than start with existing designs, NG2 erased the template and started from scratch. The result changes the game in firearms suppression. The MAXFLO 3D™ virtually eliminates all of the major issues common with firearms suppressors, back-pressure, first round “pop” and flash, accuracy robbing turbulence, recoil, excessive heat buildup, and more. All while maintaining hearing-safe levels of sound suppression across a wide variety of weapons systems and calibers. Quiet, soft-shooting, light-weight, strong, and user-serviceable, the MAXFLO 3D™ has it all.

Deadair Silencers Wolverine PBS-1

$995.00
PEOPLE SAID IT COULDN’T BE DONE. You want to build a dedicated AK suppressor? “You can’t do that.” “They’re too loud.” “What about non-concentric threads?” “How will it mount consistently?” “There’s too many variations.” And yet, here it is. AK and combloc gun lovers rejoice. The Wolverine strikes the perfect balance between suppression and minimal back pressure. SO WHAT DOES THE WOLVERINE PBS-1 SILENCER FIT? You won’t have to buy multiple silencers to fit different threaded combloc rifles. The Wolverine offers user changeable thread inserts. The Wolverine ships with a 14L thread insert. We plan on making 14R, 24R, 26L, 15mm, 16mm, 1/2×28, 5/8×24, and 9/16L as well; and possibly more will be added to the list depending on demand.

MAXFLO 3D AFD SUPPRESSOR 5.56 MM

$995.00
NEXGEN2 Defense (NG2) has brought new suppression technology to the market with their MAXFLO 3D™. Utilizing “Advanced Flow Dynamics™ (AFD)” Zero Back-Pressure Suppression™ technology. The MAXFLO 3D rewrites the rules in firearms suppression. Rather than start with existing designs, NG2 erased the template and started from scratch. The result changes the game in firearms suppression. The MAXFLO 3D™ virtually eliminates all of the major issues common with firearms suppressors, back-pressure, first round “pop” and flash, accuracy robbing turbulence, recoil, excessive heat buildup, and more. All while maintaining hearing-safe levels of sound suppression across a wide variety of weapons systems and calibers. Quiet, soft-shooting, light-weight, strong, and user-serviceable, the MAXFLO 3D™ has it all.

MAXFLO 3D AFD SUPPRESSOR 7.62 MM

$995.00
NEXGEN2 Defense (NG2) has brought new suppression technology to the market with their MAXFLO 3D™. Utilizing “Advanced Flow Dynamics™ (AFD)” Zero Back-Pressure Suppression™ technology. The MAXFLO 3D rewrites the rules in firearms suppression. Rather than start with existing designs, NG2 erased the template and started from scratch. The result changes the game in firearms suppression. The MAXFLO 3D™ virtually eliminates all of the major issues common with firearms suppressors, back-pressure, first round “pop” and flash, accuracy robbing turbulence, recoil, excessive heat buildup, and more. All while maintaining hearing-safe levels of sound suppression across a wide variety of weapons systems and calibers. Quiet, soft-shooting, light-weight, strong, and user-serviceable, the MAXFLO 3D™ has it all.

JHK Kwaiback CF Midnight Bronze/Black Cerakote

$850.00

Like the samurai swords of lore, we have put many countless hours into perfecting the Kwaiback into a knife that is as flawless as we can possibly make it. We pulled out all the stops with this knife! We cut no corners, nor looked for any easier ways to do it. This knife was built with hard work, for hard work. Fully-engineered internal lightening pockets, hardened stainless steel lock insert, HRD (Hoback Roller Detent), hardened stainless pivot, and stainless pivot bearings. These are just a few of the things you get with a Hoback Knife. The rest you'll just have to see for yourself!

This is what we know from Wiki about the "kwaiken" blade (and by the way, if you haven’t already figured it out, Kwaiken + Hoback = Kwaiback!): 

The kaiken "was once carried by men and women of the samuraiclass in Japan. It was useful for self-defense in indoor spaces where the long blade katana and intermediate sword wakizashiwere inconvenient. Women carried them in their kimono either in a pocket-like space (futokoro) or in the sleeve pouch (tamoto) for self-defense. When a samurai woman married, she was expected to carry a kaiken with her when she moved in with her husband." "…the kaiken is now called kwaiken (pocket knife). The modern term has no reference in historical records; also called a futokoro-gatana.”

Trijicon RMR Sight Adjustable (LED) - 3.25 MOA Red Dot RM06 TYPE 2

$699.00
Developed to improve precision and accuracy with any style or caliber of weapon, the Trijicon RMR (Ruggedized Miniature Reflex) is designed to be as durable as the legendary ACOG. The RM06 is an LED sight powered by a standard CR2032 battery. Housed in rugged forged aluminum, the RMR is extremely tough yet lightweight. New easy-to-use adjusters with audible clicks allow for quick windage and elevation adjustments. With eight available brightness settings, the reticle can be manually adjusted by pressing the plus or minus buttons on either side of the unit. To switch to auto adjust mode simply press both buttons simultaneously and release. To save battery life, turn the optic off by pressing both buttons simultaneously and holding for 3 seconds. The Trijicon RMR is tougher than any alternative and suitable for military, law enforcement and hunting applications.

JHK A8 Slimline Folder, 3.25" Blade Black

$625.00

A8 Slimline

The A8 is the down-home, hard-work inspired folder. We built this knife to be at home in your pocket, so it’s always where you need it and you don't have to think about it. It just plain works. We took the A10 folder and scaled it down to be much more pocket-friendly, while still being large and in charge! The A8 still sports a 3.25” long blade like its A10 big brother, but it’s much narrower and slides into the pocket with ease.

And anytime you see the word “Slimline,” you know the knife will be lighter, faster, and thinner for even more ease of carrying. It will boast the same strength and precision engineering you have come to expect from Jake Hoback Knives.

Reactive Custom stripped Topend 19 Gen 3

$600.00
More awesomeness from the Reactive Custom shop!

Half Face Blades - Disaster Breacher W/ Bocote Handle

$495.00
Half Face Blades was founded by Andrew Arrabito, Navy SEAL (ret.), to meet the need for high-quality, “go to” knives and axes – usable, personalized, functional, versatile tools that work for every person in every walk of life. Andrew grew up hunting, camping and fishing in the great outdoors. After high school he joined the US Navy, determined to achieve the honor of serving in the United States Navy SEAL Teams. It was during his time in the Teams that Andrew decided to bring the “end user” back to the beginning, to learn blade-smithing. From the beginning, Andrew’s goal was to make simple blade designs for consumers who demand the finest products. With his real-world experience in using cutting devices in super-charged action, Andrew understands what will be demanded from his blades. And he makes them to meet those demands. Half Face Blades knives are designed with the distinction and ruggedness required for the work they are intended to do. Each knife is calculated to meet requirements gained by experience, by testing knives and axes, by using them over time at sea and in remote wildernesses. HFB knives bring the soul of rugged, dependable, combat knives and tools to a variety of settings - from special operations tools for warriors, hunters and backpackers, to knives for the kitchen and great American workers. “I wanted each person to have a usable tool, embodied with a warrior’s spirit, that will perform to their needs during their walk in life.”

Half Face Blades - Disaster Breacher W/ Blood Wood Handle

$495.00
Half Face Blades was founded by Andrew Arrabito, Navy SEAL (ret.), to meet the need for high-quality, “go to” knives and axes – usable, personalized, functional, versatile tools that work for every person in every walk of life. Andrew grew up hunting, camping and fishing in the great outdoors. After high school he joined the US Navy, determined to achieve the honor of serving in the United States Navy SEAL Teams. It was during his time in the Teams that Andrew decided to bring the “end user” back to the beginning, to learn blade-smithing. From the beginning, Andrew’s goal was to make simple blade designs for consumers who demand the finest products. With his real-world experience in using cutting devices in super-charged action, Andrew understands what will be demanded from his blades. And he makes them to meet those demands. Half Face Blades knives are designed with the distinction and ruggedness required for the work they are intended to do. Each knife is calculated to meet requirements gained by experience, by testing knives and axes, by using them over time at sea and in remote wildernesses. HFB knives bring the soul of rugged, dependable, combat knives and tools to a variety of settings - from special operations tools for warriors, hunters and backpackers, to knives for the kitchen and great American workers. “I wanted each person to have a usable tool, embodied with a warrior’s spirit, that will perform to their needs during their walk in life.”

JHK MK Ultra Folder, Titanium Black Fallout

$450.00
MK Ultra
The MK Ultra is our smallest and lightest knife to-date. Experience gained through 12 years of knife-making guided me in building this knife. Everything was thought-out and engineered to make it as strong and reliable as possible!

The stainless steel lock insert is completely captured by internal 3D machined pockets. The only visible portion of the lock is the generous jimping for lock release.

The precision-turned 17-4PH pivots and standoffs have a +-.0002 tolerance.

The MK Ultra features rolling bearing construction, with hardened stainless bearing races.

 

This Knife Is Made To Last!

JHK MK Ultra Folder, Titanium Stonewash

$425.00
MK Ultra
The MK Ultra is our smallest and lightest knife to-date. Experience gained through 12 years of knife-making guided me in building this knife. Everything was thought-out and engineered to make it as strong and reliable as possible!

The stainless steel lock insert is completely captured by internal 3D machined pockets. The only visible portion of the lock is the generous jimping for lock release.

The precision-turned 17-4PH pivots and standoffs have a +-.0002 tolerance.

The MK Ultra features rolling bearing construction, with hardened stainless bearing races.

 

This Knife Is Made To Last!

AGENCY ARMS PREMIER LINE GLOCK 43 BARREL

$300.00
Agency Arms Premier Lines Are for those who demand uncompromised performance and unrivaled appearance. While each of our lines maintain the same core accuracy and reliability, the Premier Line’s focus is giving attention to every detail. With added performance from our polished feed ramp to a polished crown to reduce friction. (see Specifications for more info)

AGENCY ARMS PREMIER LINE GLOCK 34 BARREL

$300.00
Agency Arms Premier Lines Are for those who demand uncompromised performance and unrivaled appearance. While each of our lines maintain the same core accuracy and reliability, the Premier Line’s focus is giving attention to every detail. With added performance from our polished feed ramp to a polished crown to reduce friction. (see Specifications for more info)

AGENCY ARMS PREMIER LINE GLOCK 17 BARREL

$300.00
Agency Arms Premier Lines Are for those who demand uncompromised performance and unrivaled appearance. While each of our lines maintain the same core accuracy and reliability, the Premier Line’s focus is giving attention to every detail. With added performance from our polished feed ramp to a polished crown to reduce friction. (see Specifications for more info)

AGENCY ARMS PREMIER LINE GLOCK 26 BARREL

$300.00
Agency Arms Premier Lines Are for those who demand uncompromised performance and unrivaled appearance. While each of our lines maintain the same core accuracy and reliability, the Premier Line’s focus is giving attention to every detail. With added performance from our polished feed ramp to a polished crown to reduce friction. (see Specifications for more info)

AGENCY ARMS PREMIER LINE GLOCK 19 BARREL

$300.00
Agency Arms Premier Lines Are for those who demand uncompromised performance and unrivaled appearance. While each of our lines maintain the same core accuracy and reliability, the Premier Line’s focus is giving attention to every detail. With added performance from our polished feed ramp to a polished crown to reduce friction. (see Specifications for more info)

LEFT HANDED RAPID TRANSITION SIGHT™ WITH TRIJICON NIGHT SIGHTS – SET (FRONT & REAR)

$299.95
Dueck Defense, Inc. Rapid Transition Sights™ are the ultimate backup sight, designed to sharpen firearms performance while seamlessly mounting onto the rail of a standard rifle. The low-profile designs are easily mounted to the upper picatinny rail of an M4/M16 but at an offset of 45 degrees to avoid conflicting with the primary sight. These state-of-the-art sights are optimized for shooting close-up targets or as a backup sight and are available in right-hand or left-hand applications. All products are individually handcrafted with premium quality materials and Made in the USA.

RAPID TRANSITION SIGHT™ WITH TRIJICON NIGHT SIGHTS – SET (FRONT & REAR)

$299.95
Dueck Defense, Inc. Rapid Transition Sights™ are the ultimate backup sight, designed to sharpen firearms performance while seamlessly mounting onto the rail of a standard rifle. The low-profile designs are easily mounted to the upper picatinny rail of an M4/M16 but at an offset of 45 degrees to avoid conflicting with the primary sight. These state-of-the-art sights are optimized for shooting close-up targets or as a backup sight and are available in right-hand or left-hand applications. All products are individually handcrafted with premium quality materials and Made in the USA.

Elfmann Tactical 3-Gun Trigger Curved

$279.00
ELF 3-Gun Trigger
 
The ELF 3-Gun Drop-In Trigger has been built for winning competitions. The only AR-15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. The skeletonized hammer combined with our exclusive .043 double double wound polished piano wire hammer spring make for an incredibly fast lock time. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR-15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The 3-Gun trigger may be ordered with a curved or straight shoe.
 
The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you. 

Elfmann Tactical 3-Gun Trigger FLAT

$279.00
ELF 3-Gun Trigger
 
The ELF 3-Gun Drop-In Trigger has been built for winning competitions. The only AR-15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. The skeletonized hammer combined with our exclusive .043 double double wound polished piano wire hammer spring make for an incredibly fast lock time. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR-15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The 3-Gun trigger may be ordered with a curved or straight shoe.
 
The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you. 

Elfmann Tactical Match Trigger FLAT

$259.00
The ELF Drop-In Match Trigger has been built for performance. The only AR- 15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR- 15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The match trigger may be ordered with a curved or straight shoe.
 
The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you. 

TRIARC Drop-In TRACK Barrel GLOCK 17

$259.00
TRIARC Systems Drop-In Glock TRACK Barrel for G17

TRIARC Drop-In TRACK Barrel GLOCK 19

$259.00
TRIARC Systems Drop-In Glock TRACK Barrel for G19

RAPID TRANSITION SIGHT™ WITH FIBER OPTICS – SET (FRONT & REAR)

$249.95
Dueck Defense, Inc. Rapid Transition Sights™ are the ultimate backup sight, designed to sharpen firearms performance while seamlessly mounting onto the rail of a standard rifle. The low-profile designs are easily mounted to the upper picatinny rail of an M4/M16 but at an offset of 45 degrees to avoid conflicting with the primary sight. These state-of-the-art sights are optimized for shooting close-up targets or as a backup sight and are available in right-hand or left-hand applications. All products are individually handcrafted with premium quality materials and Made in the USA.

Blacklist Ultra Match G43 Barrel THREADED

$214.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

Blacklist Ultra Match G26 Barrel THREADED

$214.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

Blacklist Ultra Match G17 Barrel THREADED

$214.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

Blacklist Ultra Match G19 Barrel THREADED

$214.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

Agency Arms PORTED Match Barrels

$210.00
Agency Premier and Standard Match Barrels with optional Porting!

Blacklist Ultra Match G17 Barrel NON-THREADED

$204.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

Blacklist Ultra Match G26 Barrel NON-THREADED

$204.99
Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Our barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Our fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

AGENCY ARMS MID LINE GLOCK 19 BARREL

$200.00
Agency Arms Mid Line are for those who desire functionality as well as a unique appearance. While each of our lines maintain the same core accuracy and reliability, Our Mid Line focuses on additional machining enhancements and appearance while only a having modest price increase over the Standard Line models.

AGENCY ARMS MID LINE GLOCK 17 BARREL

$200.00
Agency Arms Mid Line are for those who desire functionality as well as a unique appearance. While each of our lines maintain the same core accuracy and reliability, Our Mid Line focuses on additional machining enhancements and appearance while only a having modest price increase over the Standard Line models.

AGENCY ARMS MID LINE GLOCK 34 BARREL

$200.00
Agency Arms Mid Line are for those who desire functionality as well as a unique appearance. While each of our lines maintain the same core accuracy and reliability, Our Mid Line focuses on additional machining enhancements and appearance while only a having modest price increase over the Standard Line models.

AGENCY ARMS MID LINE GLOCK 43 BARREL

$200.00
Agency Arms Mid Line are for those who desire functionality as well as a unique appearance. While each of our lines maintain the same core accuracy and reliability, Our Mid Line focuses on additional machining enhancements and appearance while only a having modest price increase over the Standard Line models.

AGENCY ARMS MID LINE GLOCK 26 BARREL

$200.00
Agency Arms Mid Line are for those who desire functionality as well as a unique appearance. While each of our lines maintain the same core accuracy and reliability, Our Mid Line focuses on additional machining enhancements and appearance while only a having modest price increase over the Standard Line models.

RAPID TRANSITION SIGHT™ – SET (FRONT & REAR)

$199.95
Dueck Defense, Inc. Rapid Transition Sights™ are the ultimate backup sight, designed to sharpen firearms performance while seamlessly mounting onto the rail of a standard rifle. The low-profile designs are easily mounted to the upper picatinny rail of an M4/M16 but at an offset of 45 degrees to avoid conflicting with the primary sight. These state-of-the-art sights are optimized for shooting close-up targets or as a backup sight and are available in right-hand or left-hand applications. All products are individually handcrafted with premium quality materials and Made in the USA.

Agency Arms M&P Trigger Kit

$170.00
** AGENCY SHOE IS DESIGNED TO WORK ONLY WITH APEX TACTICAL FORWARD SERE KIT** **DO NOT INSTALL SHOE IN CONJUNCTION WITH OTHER KITS**

AGENCY ARMS STANDARD LINE GLOCK 34 BARREL

$160.00
Agency Arms Standard Line are for those who prefer a purely functional design. While each of our lines maintain the same core accuracy and reliability, the Standard Lines focus are functionality and affordability.

AGENCY ARMS STANDARD LINE GLOCK 26 BARREL

$160.00
Agency Arms Standard Line are for those who prefer a purely functional design. While each of our lines maintain the same core accuracy and reliability, the Standard Lines focus are functionality and affordability.

AGENCY ARMS STANDARD LINE GLOCK 43 BARREL

$160.00
Agency Arms Standard Line are for those who prefer a purely functional design. While each of our lines maintain the same core accuracy and reliability, the Standard Lines focus are functionality and affordability.

AGENCY ARMS STANDARD LINE GLOCK 17 BARREL

$160.00
Agency Arms Standard Line are for those who prefer a purely functional design. While each of our lines maintain the same core accuracy and reliability, the Standard Lines focus are functionality and affordability.

AGENCY ARMS STANDARD LINE GLOCK 19 BARREL

$160.00
Agency Arms Standard Line are for those who prefer a purely functional design. While each of our lines maintain the same core accuracy and reliability, the Standard Lines focus are functionality and affordability.

AGENCY ARMS BONESAW AUTHORIZATION FEE

$150.00

Note: This is the ONLY way to order the "Bonesaw" cuts on a CUSTOMER SUPPLIED gun through Agency Arms.

We are accepting Authorization Fee's for Agency Arms to gunsmith a customer supplied Glock pistol finished in the Reactive Gunworks exclusive "Bonesaw" cut.

Customer Supplied Process:
1) Pay the "Bonesaw Authorization Fee" to Reactive Gunworks (each fee entitles you to the design rights for 1 pistol)

2) Using your Order Confirmation code from Reactive Gunworks, place your Bonesaw order directly with Agency Arms and pay the required 50% deposit (at www.AgencyArms.com)

3) Mail your Glock directly to Agency Arms (you will receive shipping instructions directly from Agency)

4) Upon completion of the gunsmithing by Agency Arms, pay the remaining balance due and Agency Arms will return ship your firearm.

How long will it take?
Build Times are provided by Agency Arms and are based off Demand.

Not available on subcompact (ie.G42/43) or long slide (ie.G34/17L) or large

Trijicon HD XR Night Sights GLOCK

$150.00
With the challenges of the changing landscape in law enforcement comes the next evolution of the Trijicon Night Sight line. Building on the features of the current HD™ Night Sights, the Trijicon HD XR™ night sights are for the next level of advanced target identification and engagement at increased distances. A thinner front sight post allows shooters to have a larger field of view which further enhances the ability to identify targets, expedite engagements and see location of hits on target at longer distances. Pistol shooters that need the advantage of a more precise engagement in any light can count on the Trijicon HD XR™ Night Sights.

Agency Arms GEN 5 Drop-In Trigger 9mm / .40 / .357

$150.00
FITS GENERATION 5 MODELS ONLY

Trijicon SUPRESSOR Night Sights GLOCK

$145.00
Trijicon Bright & Tough™ Suppressor Night Sights are three-dot tritium iron sights that allow shooters the ability to line up their sights in both bright and low-light situations. While standard height sights do not provide an aiming solution when using a suppressed firearm, the additional height of suppressor night sights will clear the added height of a suppressor, allowing shooters the ability to line up their sights on target. Additionally, suppressor night sights can be used as back up iron sights with the Trijicon RMR®. Green tritium lamps are warranted for 12 years from date of manufacture.​

Trijicon HD Night Sights GLOCK

$135.00
The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. Green tritium lamps are warranted for 12 years from date of manufacture.​

Streamlight Protac HL-X Handheld 1000 Lumen CUSTOM TAILCAP

$155.00 $110.00

TAILCAP HAS BEEN TURNED ON LATHE TO FACILITATE EASIER USE

AGENCY ARMS 417 COMPENSATOR 4 PORT

$100.00
Agency Arms 417 Compensator for 9mm Models 26, 19, 17 and 34.

AGENCY ARMS 417 COMPENSATOR SINGLE PORT

$100.00
Agency Arms 417 Compensator for 9mm Models 26, 19, 17 and 34.

Guncraft Cloak Mod2 Glock 26

$82.00
The Cloak is designed to be worn in either appendix or strong side position, and was built to be comfortable and efficient, making it perfect for everyday carry.

Guncraft Cloak Mod2 Glock 19

$82.00
The Cloak is designed to be worn in either appendix or strong side position, and was built to be comfortable and efficient, making it perfect for everyday carry.

Vickers Elite Battlesight for Glock, Black Serrated

$49.95
The high profile Vickers Elite Battlesight rear has a .145” wide, deep U-Notch for optimum sighting in low-light, dynamic range conditions and is a perfect match to our .125” wide front sights. The concave non-reflective rear blade is serrated 40 lines per inch, while the notch area is recessed into a semi-circular pocket for a crisp, protected sight picture. Two hardened set-screws ensure this sight will never shoot loose under the most demanding conditions. This snag-free rear sight also has a shelf shape that enables one-hand slide cycling or malfunction clearance and a rugged, non-reflective matte black parkerized finish. The Vickers Elite Battlesight is available with single dot Tritium and plain black serrated rear blades and your choice of black serrated, green/red fiber optic, tritium and genuine, never dulling gold bead front sight styles. The high profile of the Vickers Elite Battlesight allows the use of a taller front sight and deeper rear notch for better sight tracking during high speed shooting situations. Once you try this sight system you will be convinced that the Vickers Elite Battlesight is the best performance upgrade you can make to your Glock® pistol! Larry Vickers is a retired US Army 1st SFOD- Delta combat veteran with years of experience in the firearms industry as a combat marksmanship instructor and industry consultant. Find out more about Larry Vickers on his website www.vickerstactical.com NOTE: Sights may require minor fitting and may not be returned after installation. The Vickers Elite Glock® Sight set requires the use of a .245”tall front sight for all caliber Glock® pistols except for .45 ACP and 10mm which will typically require the .230” front sight. Sights may require minor fitting and may not be returned after installation. These front sights are taller than factory Glock® and not compatible with standard factory rear sights without adjusting the sight height. Wilson Combat Vickers Glock® rear sights are not compatible with factory Glock® MOS (Modular Optic System) slide models due to the rearward relocation of the sight dovetail position. Glock Rear Sight Installation FAQ Remove the magazine and make sure your pistol is unloaded. Remove and Field strip slide assembly and secure the slide in a padded vise. Remove existing rear sight with hammer and punch. Clean rear sight dovetail and press in new rear sight from right to left. If rear sight will not start into approximately 50% of the dovetail you may need to remove very small amounts of material from the bottom and sides of the dovetail portion of the rear sight-usually just a few light passes will do. A safe sided dovetail file, small diamond hone or sanding stick are good tools for this. Go slowly and check your fit. Once you are able to get 50% of the sight base into the dovetail attempt to tap the sight in place with a hammer and non marring punch/dowel (wood, polymer, aluminum) or appropriate sight pusher. If using a steel or brass punch protect the sight/punch with several layers of duct tape. Fine adjust your windage with a rear sight armorers tool or non marring punch. After you fine adjust rear sight windage install dual locking screws with a threadlocking compound like Loctite on the threads. Note-if the rear sight is loose in the dovetail your dovetail is cut oversize and the new rear sight may require peening on the edges of the dovetail for a proper fit.

Ameriglo TRGT COMP SIGHTS

$40.00
AmeriGlo, Special Combination Sight, Fits Glock 17/19/22/23, Red Fiber Front and Black Rear

Vickers Elite Snag Free Front Sight for Glock, Green Fiber Optic, .230"

$39.95
Snag Free Front Sight, Green Fiber Optic, Vickers Elite for Glock® .230” .230” height .125" wide Green Fiber optic (.0585" Diameter) Glock® Vickers Elite replacement front sight for .45 ACP and 10mm calibers Black Parkerized finish Note: .The Vickers Elite Glock® Sight set requires the use of a .245” tall front sight for all caliber Glock® pistols except for .45 ACP and 10mm which will typically require the .230” front sight. Sights may require minor fitting and may not be returned after installation. These front sights are taller than factory Glock® and not compatible with standard factory rear sights without adjusting the sight height. Replacement fiber optic rods found here: http://shopwilsoncombat.com/Fiber-Optic-Rod-Replacement-Green-0585-x-1/productinfo/583G/ Glock Front Sight Installation FAQ Remove the magazine and make sure your pistol is unloaded. Remove and field strip slide assembly. Remove Glock factory front sight with a punch or pliers. Gen-4 Glock pistols will require a front sight tool to remove the front sight retaining screw. After removal of front sight clean and degrease sight hole in slide and check the fit of the new front sight. If the new sight will seat at least 50% tap it in place with a non marring punch taking care that it remains straight. If the sight will not seat you may have to sand or lightly file the circumference of the front sight base. Install with aftermarket Glock front sight tool or 3/16” socket that has been modified to clear the slide. For a more permanent installation use red loctite around the circumference of the sight base. Reassemble your pistol and make sure sight retaining screw is not impeding operation.

Vickers Elite Snag Free Front Sight for Glock, Red Fiber Optic, .245"

$39.95
Snag Free Front Sight, Red Fiber Optic, Vickers Elite for Glock® .245” .245” height .125" wide Red Fiber optic (.0585" Diameter) Glock® Vickers Elite replacement front sight for 9mm, .40, 357 and .45 GAP calibers Black Parkerized finish Note: .The Vickers Elite Glock® Sight set requires the use of a .245” tall front sight for all caliber Glock® pistols except for .45 ACP and 10mm which will typically require the .230” front sight. Sights may require minor fitting and may not be returned after installation. These front sights are taller than factory Glock® and not compatible with standard factory rear sights without adjusting the sight height. Replacement fiber optic rods found here: http://shopwilsoncombat.com/Fiber-Optic-Rod-Replacement-Red-0585-x-1/productinfo/583G/ Glock Front Sight Installation FAQ Remove the magazine and make sure your pistol is unloaded. Remove and field strip slide assembly. Remove Glock factory front sight with a punch or pliers. Gen-4 Glock pistols will require a front sight tool to remove the front sight retaining screw. After removal of front sight clean and degrease sight hole in slide and check the fit of the new front sight. If the new sight will seat at least 50% tap it in place with a non marring punch taking care that it remains straight. If the sight will not seat you may have to sand or lightly file the circumference of the front sight base. Install with aftermarket Glock front sight tool or 3/16” socket that has been modified to clear the slide. For a more permanent installation use red loctite around the circumference of the sight base. Reassemble your pistol and make sure sight retaining screw is not impeding operation.

Guncraft Rapid Mag Carrier Core

$33.00
Our new mag carrier for Glock 9mm/40cal magazines. This mag carrier is fully ambidextrous and IWB/OWB compatible. The user can wear the mag carrier inside waistband or outside waistband without having to change mounting hardware etc. This versatile mag carrier is a perfect item to add to your EDC or training setup.

RG HATS

$25.00
Get your Swag on and wear these Hats proud! Adjustable Snap!

Agency Arms Pistol Case

$25.00
Lockable case that fits inside of the Glock OEM Case.

Trijicon RMR Mounting KIT for Glock Pistols

$19.00
This is the Trijicon MOS kit that is used to mount an RMR properly to any Agency Arms, Salient Arms, or Fowler Industries pistol with an RMR cutout. It includes a thin metal sealing plate, and (2) correct length screws plus allen wrench.

Men's RG ROUND T-Shirt BLUE

$18.00
Get your Swag on and wear these shirts proud!

Men's Auto Out Black T-Shirt

$18.00
Get your Swag on and wear these shirts proud!

Men's Auto Out Grey T-Shirt

$18.00
Get your Swag on and wear these shirts proud!

Men's Saw T-shirt Charcoal

$18.00
Get your Swag on and wear these shirts proud!

Men's #MERICA T-Shirt Charcoal

$18.00
Get your Swag on and wear these shirts proud!

Men's #MERICA T-Shirt Red

$18.00
Get your Swag on and wear these shirts proud!

Men's FLAG T-Shirt Charcoal

$18.00
Get your Swag on and wear these shirts proud!

Men's RG SHIELD T-Shirt BLACK

$18.00
Get your Swag on and wear these shirts proud!

Men's RG ROUND T-Shirt BLACK

$18.00
Get your Swag on and wear these shirts proud!

Men's RG ROUND T-Shirt GREY

$18.00
Get your Swag on and wear these shirts proud!

Men's RPG T-Shirt BLACK

$18.00
Get your Swag on and wear these shirts proud!

Women's RG V-Neck BLACK

$14.00
Get your Swag on and wear these shirts proud!

Women's RG V-Neck WHITE

$14.00
Get your Swag on and wear these shirts proud!

Women's RG V-Neck GREY

$14.00
Get your Swag on and wear these shirts proud!

Women's RG Tank PURPLE

$14.00
Get your Swag on and wear these shirts proud!

Women's RG Tank ORANGE

$14.00
Get your Swag on and wear these shirts proud!

Agency Ti RMR SCREWS

$10.00
This set comes with a set of Titanium screws for mounting a Trijicon RMR on the Agency Slide Glock®: (1 Long Screw and 1 Shortened Screw) They are installed by placing the long screw on the left and the short screw on the right. Please do not install them in reverse or it will cause your weapon to fail to extract rounds properly.

Reactive PVC Patches

$4.95
High Quality PVC Patches. 3" x 3" "RG" Shield 3" x 1" "Reactive Gunworks" Blackout 3" x 1.5" "RG" Whiteout Flag