Menu

Sights and Lights

LIVE INVENTORY

View as Grid List
Sort by
Display per page

Trijicon RMR Sight Adjustable (LED) - 3.25 MOA Red Dot RM06 TYPE 2

$630.00
Developed to improve precision and accuracy with any style or caliber of weapon, the Trijicon RMR (Ruggedized Miniature Reflex) is designed to be as durable as the legendary ACOG. The RM06 is an LED sight powered by a standard CR2032 battery. Housed in rugged forged aluminum, the RMR is extremely tough yet lightweight. New easy-to-use adjusters with audible clicks allow for quick windage and elevation adjustments. With eight available brightness settings, the reticle can be manually adjusted by pressing the plus or minus buttons on either side of the unit. To switch to auto adjust mode simply press both buttons simultaneously and release. To save battery life, turn the optic off by pressing both buttons simultaneously and holding for 3 seconds. The Trijicon RMR is tougher than any alternative and suitable for military, law enforcement and hunting applications.

Leupold Deltapoint Pro 2.5 MOA

$399.99
Leupold, DeltaPoint Pro Reflex Sight, 2.5 MOA Dot, Matte Black Finish

Trijicon HD Night Sights GLOCK

$150.00
The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. Green tritium lamps are warranted for 12 years from date of manufacture.​

Vickers Elite Battlesight set for Glock, TRITIUM FRONT & REAR

$149.99
The high profile Vickers Elite Battlesight rear has a .145” wide, deep U-Notch for optimum sighting in low-light, dynamic range conditions and is a perfect match to our .125” wide front sights. The concave non-reflective rear blade is serrated 40 lines per inch, while the notch area is recessed into a semi-circular pocket for a crisp, protected sight picture. Two hardened set-screws ensure this sight will never shoot loose under the most demanding conditions. This snag-free rear sight also has a shelf shape that enables one-hand slide cycling or malfunction clearance and a rugged, non-reflective matte black parkerized finish. The Vickers Elite Battlesight is available with single dot Tritium and plain black serrated rear blades and your choice of black serrated, green/red fiber optic, tritium and genuine, never dulling gold bead front sight styles. The high profile of the Vickers Elite Battlesight allows the use of a taller front sight and deeper rear notch for better sight tracking during high speed shooting situations. Once you try this sight system you will be convinced that the Vickers Elite Battlesight is the best performance upgrade you can make to your Glock® pistol! Larry Vickers is a retired US Army 1st SFOD- Delta combat veteran with years of experience in the firearms industry as a combat marksmanship instructor and industry consultant. Find out more about Larry Vickers on his website www.vickerstactical.com NOTE: Sights may require minor fitting and may not be returned after installation. The Vickers Elite Glock® Sight set requires the use of a .245”tall front sight for all caliber Glock® pistols except for .45 ACP and 10mm which will typically require the .230” front sight. Sights may require minor fitting and may not be returned after installation. These front sights are taller than factory Glock® and not compatible with standard factory rear sights without adjusting the sight height. Wilson Combat Vickers Glock® rear sights are not compatible with factory Glock® MOS (Modular Optic System) slide models due to the rearward relocation of the sight dovetail position. Glock Rear Sight Installation FAQ Remove the magazine and make sure your pistol is unloaded. Remove and Field strip slide assembly and secure the slide in a padded vise. Remove existing rear sight with hammer and punch. Clean rear sight dovetail and press in new rear sight from right to left. If rear sight will not start into approximately 50% of the dovetail you may need to remove very small amounts of material from the bottom and sides of the dovetail portion of the rear sight-usually just a few light passes will do. A safe sided dovetail file, small diamond hone or sanding stick are good tools for this. Go slowly and check your fit. Once you are able to get 50% of the sight base into the dovetail attempt to tap the sight in place with a hammer and non marring punch/dowel (wood, polymer, aluminum) or appropriate sight pusher. If using a steel or brass punch protect the sight/punch with several layers of duct tape. Fine adjust your windage with a rear sight armorers tool or non marring punch. After you fine adjust rear sight windage install dual locking screws with a threadlocking compound like Loctite on the threads. Note-if the rear sight is loose in the dovetail your dovetail is cut oversize and the new rear sight may require peening on the edges of the dovetail for a proper fit.

Trijicon SUPRESSOR Night Sights M&P

$145.00
Trijicon Bright & Tough™ Suppressor Night Sights are three-dot tritium iron sights that allow shooters the ability to line up their sights in both bright and low-light situations. While standard height sights do not provide an aiming solution when using a suppressed firearm, the additional height of suppressor night sights will clear the added height of a suppressor, allowing shooters the ability to line up their sights on target. Additionally, suppressor night sights can be used as back up iron sights with the Trijicon RMR®. Green tritium lamps are warranted for 12 years from date of manufacture.​

Trijicon Suppressor Night Sights GLOCK

$145.00
Trijicon Bright & Tough™ Suppressor Night Sights are three-dot tritium iron sights that allow shooters the ability to line up their sights in both bright and low-light situations. While standard height sights do not provide an aiming solution when using a suppressed firearm, the additional height of suppressor night sights will clear the added height of a suppressor, allowing shooters the ability to line up their sights on target. Additionally, suppressor night sights can be used as back up iron sights with the Trijicon RMR®. Green tritium lamps are warranted for 12 years from date of manufacture.​