Menu

Weapons

LIVE INVENTORY

View as Grid List
Sort by

L3 Light Weapon Thermal Sight (LWTS)

$15,099.00 $9,800.00

Description

The Light Weapon Thermal Sight (LWTS) is an extremely versatile thermal imaging solution.  This clip-on system mounts in front of your day optics and allows you to view your reticle over the thermal image.  In addition, it can be used as a handheld observation tool or mounted by itself as a stand-alone weapon sight.  The thermal imaging capability of the LWTS allows for long-wave infrared observation and target identification under adverse conditions including, light rain, smoke, light snow and low light to total darkness.

  • 640x480 17 micron resolution
  • Real-time video in/out for remote viewing
  • Image and video capture for download to PC

Nighthawk Custom Agent 2 1911 10MM

$4,715.00

DETAILS

 

Meticulously crafted and designed down to the last detail, the Nighthawk Agent 2 is the next evolution of collaboration between Nighthawk Custom, Agency Arms, Railscales, and Hillbilly 223. Utilizing the “One Gun, One Gunsmith” approach, Nighthawk has taken the 1911 platform to an all-new level of innovation with the same hand-crafted quality and beauty, synonymous with Nighthawk Custom.

 

The Agent 2 was designed to push the boundaries of what is possible with the 1911 in both form and function.  Combining gunsmith craftsmanship with modern machining techniques, the resulting pistol speaks for itself.  A truly unique and stunning firearm designed with the operator in mind, the Agent 2 stands as the epitome of innovation.

Nighthawk Custom - GRP Double Stack 9mm Threaded

$4,220.00 $3,900.00
The GRP may be our base model, but it is far from an entry-level range pistol. The GRP uses all of the same parts and expertise that go into our entire Nighthawk lineup. All of the components on this pistol are oversized and fully machined, which require detailed craftsmanship to fit. This model, along with all others use the One Gun, One Gunsmith philosophy which means the gun is built and prepped by a single gunsmith. We have no assembly line, we have a group of master gunsmiths that start with a box of parts and build them into The Finest Custom 1911 Pistol. It makes for an incredible shooter on the range, sure to make your grouping tighter and more accurate.

Nighthawk Custom - Trooper .45 ACP

$3,399.00 $3,199.00
This new offering from Nighthawk Custom was conceived with the no frills, straight forward gun owner in mind. The Trooper represents the core of what Nighthawk is all about: American Made, finely-tuned, hand built craftsmanship. The beauty of the Trooper model is in its simplicity, giving the shooter everything they need in a pistol and nothing they don’t need. Built on a foundation of hand-fit, fully machined parts. The Trooper sacrifices nothing and still provides the shooter with the same quality and reliability you’ve come to expect from Nighthawk Custom

TRI-11 Double Stack Cobalt Short Dust Cover

$2,989.00

The TRI-11 is a modern take on the timeless 1911. It is a single action action double stack pistol. The TRI-11 offers the 1911 package with increased capacity. Each of our TRI-11's are hand fitted for precise tolerances and tuned to provide a smooth and reliable action, with superior recoil management, and increased longevity. These pistols are functional works of art that will push forward for generations.

Each of our Single Action Only are built on the trusted platform from certified American steel using all billet steel components. Our match grade barrels are hand fitted and feature patented TRACK rifling with a thick barrel bushing. Our armorers take time to meticulously hand fit each slide to frame in order to achieve our tolerance standards for the smoothest operating action possible. Every SAO pistol features polished feed ramps, light weight hammers, ambidextrous safety, and fiber optic front sight with ledge rear sight.

The Triarc Tri-11 and 1911 series pistols are crafted with the finest components available by some of the most experienced pistolsmiths in the industry. We use only billet steel components machined from either 4140 chrome moly or 416 R stainless stock. We source parts from the most reliable vendors know for the quality of their products, such as Dawson Precision, EGW, Ed Brown, 10-8, X-line, Tripp Research, Wolff Gunsprings, VZ Grips and more. Our Tri-11 pistols are compatible with many aftermarket components designed for use with STI 2011 style pistols such as magazines, mag catches, extended mag wells, mainspring housings and triggers. Each pistol is shipped with 2 mags and a pelican hard case. Trigger weights are set to 3-3.5lb. Pistols are available with either 5” Government or 4.3” Commander length barrels. Commander size pistols are compatible with Colt Commander style recoil system components for ease of maintenance and customization to specific loads.

Wilson Combat EDC X9 LIGHT RAIL, Armor-Tuff®, 9mm BLACK EDITION

$3,095.00 $2,900.00

Wilson Combat has redefined the defensive handgun with the EDC X9, a modern hybrid of our EDC 9 1911 slide assembly mated with the all new high-capacity X-frame. This groundbreaking design combines the accuracy, ergonomics and trigger pull of the classic 1911 design with enhanced reliability, and concealable, high capacity performance.

Designed by Bill Wilson and Wilson Combat engineers, the X-frame is a 15-round, high capacity 9mm 1911 frame that is similar in size to a traditional compact, single stack 1911. The X-frame is machined at Wilson Combat from T6-7075 aluminum and accepts a high capacity magazine with a grip that is smaller in circumference than a standard 1911 while retaining traditional 1911 controls. The EDC X9 15-round, double column magazine was developed jointly with Mec-Gar, industry leaders in double column magazine design.

The screwless X-frame design uses hammer spring tension to keep the aggressive traction Wilson/VZ G-10 starburst pattern grips securely in place. The result is a highly concealable, high capacity pistol frame that completely disassembles for cleaning with only a single punch without screws or frame bushings and a more natural, oval grip shape.

The EDC X9 slide assembly is from our single stack EDC 9 pistol with Wilson Combat’s ERS “Enhanced Reliability System” for 9mm 1911’s. The ERS is tailored to the varying power level of 9mm ammunition and maintains impressive reliability in all conditions, even when heavily fouled and low on lubrication. Other features include a Tri-Top slide profile with user-replaceable front sight, single lug tapered cone match-grade 1911 barrel, rear Tactical Adjustable Battlesight and a rugged, user-serviceable external extractor.

The ergonomic design of the X-frame grip in conjunction with an enlarged trigger guard window and your choice of radiused trigger pad length fits all hand sizes comfortably and improves recoil control. The EDC X9 front and back strap are machined with the Wilson Combat X-Tac tread pattern that provides a comfortable but tactile grip in all shooting conditions. The EDC X9 will fit the majority of holsters on the market designed for 4” or 4.25” 1911 pistols and is offered with or without an accessory rail.

Thoroughly tested by our team of designers, champion shooters and external industry experts, the Wilson Combat EDC X9 offers discriminating shooters 1911 match-grade accuracy, superior ergonomics and concealability combined with modern service pistol capacity and reliability.

Agency Arms 34 G4 Urban DTF Alpine Multicam

$2,509.00 $2,409.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms Glock 34 Gen 4 Bonesaw DTF DLC

$2,380.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms Glock 34 Gen 4 Bonesaw DLC EDC Stippling

$2,330.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms Glock 34 Gen 4 Bonesaw DLC

$2,330.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms Glock 17 Gen 4 Hybrid TiN Slide Mid TiN Barrel

$2,275.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms Glock 20 Field Battle DLC

$2,199.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 17 G4 GREY 2-Tone

$2,289.00 $2,189.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms Glock 34 Gen 4 Hybrid DLC

$2,180.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 19 G4 URBAN Multicam Bronze

$2,279.00 $2,179.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms Glock 19x Peacekeeper DLC

$2,150.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms Glock 19x Peacekeeper DLC

$2,150.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

TRIARC Glock 34 V2

$2,200.00

Obtaining the greatest accuracy for target shooting was the main reason for the development of the GLOCK 34 which has an extended barrel, greater slide dimensions, and unmatched reliability in a 9x19mm pistol. This highly accurate pistol has found widespread use as a competitive pistol for USPSA, IDPA, IPSC, GSSF and other sport shooting organizations.

We have advanced the Glock 34 by improving the slide, grip texture, trigger internals and adding other accessories to provide a more balance and comfortable firearm. Our fine tuning and customization options allow us to optimize the Glock platform for the end user.

Agency Arms TWF Hybrid Crushed Silver SS Barrel

$2,170.00 $2,070.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

 We start by swapping out the recoil system with an ISMI stainless steel guide rod and flat wire recoil spring.  We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms M&P M2.0 Compact Urban Arid Multicam

$2,120.00

Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group.

 

Slide Work

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol.

 

Frame work

We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms M&P M2.0 Compact Urban Black Multicam

$2,120.00

Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group.

 

Slide Work

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol.

 

Frame work

We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms M&P M2.0 Compact Bonesaw DLC

$2,120.00

Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group.

 

Slide Work

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol.

 

Frame work

We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms M&P 9 DLC

$2,119.00 $2,019.00
Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group. Slide Work All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. Frame work We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms 26 G3 Bonesaw DLC

$2,099.00 $1,999.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms M&P M2.0 Compact Urban Alpine Multicam

$2,080.00

Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group.

 

Slide Work

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol.

 

Frame work

We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms 26 G3 Hybrid EDC Stipple DLC

$1,999.00 $1,899.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms 26 G3 Hybrid EDC DLC

$1,999.00 $1,899.00

Slide Work

 

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed.  This plate is designed in a way that enables one hand manipulation of the firearm that increases safety.  We don’t do top serrations due to training issues with the masses.  On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts.  Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol. 

 

Internal Work

 

We replace only one spring in the trigger system which is the plunger safety spring.  The other springs are stock and will grant consistent primer strikes and positive reset.  We use a factory OEM minus connector and tune the factory trigger bar.  With all this work the pull weight will be 4-4.25 pounds depending on the pistol.  We also manufacture our own trigger shoe which is flat with a curved toe.  This fixes the issue of trigger/trigger guard finger and glove bite.

 

Frame work

 

 We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill.  We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol.  With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster.  We do a non-traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling and offer Gen 4 back strap melding as well for no additional charge.

Agency Arms M&P Shield Hybrid DLC

$1,849.00 $1,780.00

Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group.

 

Slide Work

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol.

 

Frame work

We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms M&P FDE Shield Field DLC

$1,849.00 $1,780.00

Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group.

 

Slide Work

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol.

 

Frame work

We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms M&P FDE Shield Hybrid DLC

$1,849.00 $1,780.00

Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group.

 

Slide Work

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol.

 

Frame work

We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

Agency Arms M&P Shield M2.0 Hybrid DLC

$1,680.00

Agency Arms presents a new build complete build package for the M&P platform. The build package includes many familiar features you see in our Glock builds. Each build also includes a set of custom Dawson Precision sights and Apex Tactical Specialties' internals for the trigger group.

 

Slide Work

All of our slides have an RMR cut standard, and come with a “Battle Plate” that fills the void when the RMR is not installed. This plate is designed in a way that enables one hand manipulation of the firearm that increases safety. We don’t do top serrations due to training issues with the masses. On our Battle Plate, the serrations and screw lugs are on the 45 angle cuts. Placing these serrations and lugs here, forces the shooter to angle the pistol away from the body when using one hand to rack the pistol.

 

Frame work

We remove the finger grooves, cut in gas pedals, and bevel out the inside area of the trigger guard on a mill. We call the gas pedals the “Accelerator Cuts” and they offer enhanced traction on the pistol. With the accelerator cuts, muzzle rise is dramatically decreased and follow up shots are faster. We do a non traditional double undercut and dock the front of the trigger guard for aesthetic purposes. We finish the frame off with full stippling

MAXFLO 3D AFD SUPPRESSOR 9MM

$995.00
NEXGEN2 Defense (NG2) has brought new suppression technology to the market with their MAXFLO 3D™. Utilizing “Advanced Flow Dynamics™ (AFD)” Zero Back-Pressure Suppression™ technology. The MAXFLO 3D rewrites the rules in firearms suppression. Rather than start with existing designs, NG2 erased the template and started from scratch. The result changes the game in firearms suppression. The MAXFLO 3D™ virtually eliminates all of the major issues common with firearms suppressors, back-pressure, first round “pop” and flash, accuracy robbing turbulence, recoil, excessive heat buildup, and more. All while maintaining hearing-safe levels of sound suppression across a wide variety of weapons systems and calibers. Quiet, soft-shooting, light-weight, strong, and user-serviceable, the MAXFLO 3D™ has it all.

MAXFLO 3D AFD SUPPRESSOR 5.56 MM

$995.00
NEXGEN2 Defense (NG2) has brought new suppression technology to the market with their MAXFLO 3D™. Utilizing “Advanced Flow Dynamics™ (AFD)” Zero Back-Pressure Suppression™ technology. The MAXFLO 3D rewrites the rules in firearms suppression. Rather than start with existing designs, NG2 erased the template and started from scratch. The result changes the game in firearms suppression. The MAXFLO 3D™ virtually eliminates all of the major issues common with firearms suppressors, back-pressure, first round “pop” and flash, accuracy robbing turbulence, recoil, excessive heat buildup, and more. All while maintaining hearing-safe levels of sound suppression across a wide variety of weapons systems and calibers. Quiet, soft-shooting, light-weight, strong, and user-serviceable, the MAXFLO 3D™ has it all.

MAXFLO 3D AFD SUPPRESSOR 7.62 MM

$995.00
NEXGEN2 Defense (NG2) has brought new suppression technology to the market with their MAXFLO 3D™. Utilizing “Advanced Flow Dynamics™ (AFD)” Zero Back-Pressure Suppression™ technology. The MAXFLO 3D rewrites the rules in firearms suppression. Rather than start with existing designs, NG2 erased the template and started from scratch. The result changes the game in firearms suppression. The MAXFLO 3D™ virtually eliminates all of the major issues common with firearms suppressors, back-pressure, first round “pop” and flash, accuracy robbing turbulence, recoil, excessive heat buildup, and more. All while maintaining hearing-safe levels of sound suppression across a wide variety of weapons systems and calibers. Quiet, soft-shooting, light-weight, strong, and user-serviceable, the MAXFLO 3D™ has it all.

Deadair Silencers Wolverine PBS-1

$995.00
PEOPLE SAID IT COULDN’T BE DONE. You want to build a dedicated AK suppressor? “You can’t do that.” “They’re too loud.” “What about non-concentric threads?” “How will it mount consistently?” “There’s too many variations.” And yet, here it is. AK and combloc gun lovers rejoice. The Wolverine strikes the perfect balance between suppression and minimal back pressure. SO WHAT DOES THE WOLVERINE PBS-1 SILENCER FIT? You won’t have to buy multiple silencers to fit different threaded combloc rifles. The Wolverine offers user changeable thread inserts. The Wolverine ships with a 14L thread insert. We plan on making 14R, 24R, 26L, 15mm, 16mm, 1/2×28, 5/8×24, and 9/16L as well; and possibly more will be added to the list depending on demand.

Half Face Blades - Disaster Breacher W/ Bocote Handle

$495.00
Half Face Blades was founded by Andrew Arrabito, Navy SEAL (ret.), to meet the need for high-quality, “go to” knives and axes – usable, personalized, functional, versatile tools that work for every person in every walk of life. Andrew grew up hunting, camping and fishing in the great outdoors. After high school he joined the US Navy, determined to achieve the honor of serving in the United States Navy SEAL Teams. It was during his time in the Teams that Andrew decided to bring the “end user” back to the beginning, to learn blade-smithing. From the beginning, Andrew’s goal was to make simple blade designs for consumers who demand the finest products. With his real-world experience in using cutting devices in super-charged action, Andrew understands what will be demanded from his blades. And he makes them to meet those demands. Half Face Blades knives are designed with the distinction and ruggedness required for the work they are intended to do. Each knife is calculated to meet requirements gained by experience, by testing knives and axes, by using them over time at sea and in remote wildernesses. HFB knives bring the soul of rugged, dependable, combat knives and tools to a variety of settings - from special operations tools for warriors, hunters and backpackers, to knives for the kitchen and great American workers. “I wanted each person to have a usable tool, embodied with a warrior’s spirit, that will perform to their needs during their walk in life.”

Half Face Blades - Disaster Breacher W/ Blood Wood Handle

$495.00
Half Face Blades was founded by Andrew Arrabito, Navy SEAL (ret.), to meet the need for high-quality, “go to” knives and axes – usable, personalized, functional, versatile tools that work for every person in every walk of life. Andrew grew up hunting, camping and fishing in the great outdoors. After high school he joined the US Navy, determined to achieve the honor of serving in the United States Navy SEAL Teams. It was during his time in the Teams that Andrew decided to bring the “end user” back to the beginning, to learn blade-smithing. From the beginning, Andrew’s goal was to make simple blade designs for consumers who demand the finest products. With his real-world experience in using cutting devices in super-charged action, Andrew understands what will be demanded from his blades. And he makes them to meet those demands. Half Face Blades knives are designed with the distinction and ruggedness required for the work they are intended to do. Each knife is calculated to meet requirements gained by experience, by testing knives and axes, by using them over time at sea and in remote wildernesses. HFB knives bring the soul of rugged, dependable, combat knives and tools to a variety of settings - from special operations tools for warriors, hunters and backpackers, to knives for the kitchen and great American workers. “I wanted each person to have a usable tool, embodied with a warrior’s spirit, that will perform to their needs during their walk in life.”

AGENCY ARMS BONESAW AUTHORIZATION FEE

$150.00

Note: This is the ONLY way to order the "Bonesaw" cuts on a CUSTOMER SUPPLIED gun through Agency Arms.

We are accepting Authorization Fee's for Agency Arms to gunsmith a customer supplied Glock pistol finished in the Reactive Gunworks exclusive "Bonesaw" cut.

Customer Supplied Process:
1) Pay the "Bonesaw Authorization Fee" to Reactive Gunworks (each fee entitles you to the design rights for 1 pistol)

2) Using your Order Confirmation code from Reactive Gunworks, place your Bonesaw order directly with Agency Arms and pay the required 50% deposit (at www.AgencyArms.com)

3) Mail your Glock directly to Agency Arms (you will receive shipping instructions directly from Agency)

4) Upon completion of the gunsmithing by Agency Arms, pay the remaining balance due and Agency Arms will return ship your firearm.

How long will it take?
Build Times are provided by Agency Arms and are based off Demand.

Not available on subcompact (ie.G42/43) or long slide (ie.G34/17L) or large

Filter by:

Clear All

Filter by