Agency Arms

This plate is made specifically for the Viper optic footprint. It comes with the adapter plate, a set of screws to mount the plate to your AOS milled slide, and a pair of screws to mount the optic to the plate.

 

AOS Vortex Viper Plate sold as a single plate in either Rear Iron Forward of the Viper or Rear Iron Behind the Viper

The Urban edition is the lightest slide we do. It has three windows and is the fastest and flattest tracking configuration. *Slide Serration count and WINDOWS will change depending on the length of the slide. These pre-cut slides will come with a ISMI Recoil Spring Assembly and a Channel Liner installed. (G43/43X slides do not come with a new Guide Rod or side windows.) They have been machined from 17-4 Stainless Steel.

This plate is made specifically for the Trijicon RMR optic footprint. It comes with the adapter plate, a set of screws to mount the plate to your AOS milled slide, and a pair of screws to mount the optic to the plate.

 

AOS Trijicon® RMR Plate sold as a single plate in either Rear Iron Forward of the RMR or Rear Iron Behind the RMR

Includes fasteners for the adapter plate and optic.

Recommended Torque Specs for Plate Screws: 8-10 inch lbs with a tiny bit of blue loctite.

Recommended Torque Specs for Optic Screws: 10-12 inch lbs with a tiny bit of blue loctite.

Please note: While the 507C/508T have the same footprint as the Trijicon RMR, it utilizes shorter fasteners. If you are purchasing this plate to install on a 507C/508T, you will need to purchase shorter screws here

These flame colorized titanium screws are for mounting a Shield RMSc on an Agency slide with a dedicated RMSc cut.

Titanium screws for mounting a Trijicon RMR on an Agency Slide. 2 Equal length screws for M&P 9

Titanium screws for mounting a Trijicon RMR on an Agency Slide. For Glock®: (1 Long Screw and 1 Shortened Screw) They are installed by placing the long screw on the left and the short screw on the right. Please do not install them in reverse or it will cause your weapon to fail to extract rounds properly.