AOS Plates

This plate is made specifically for the Aimpoint ACRO optic footprint. It comes with the adapter plate, a set of compatible iron sights, and screws to mount the plate to your AOS milled slide.

 

The AOS ACRO Plate is designed to support the Aimpoint Acro P-1 and P-2. It features a modular rear sight and a serrated black front sight.

 

Recommended Torque Specs for Plate Screws: 8-10 inch lbs with a tiny bit of blue loctite.

 

NOT RECOMMENDED FOR THE STEINER MPS -- OUR REAR MODULAR SIGHT IS NOT COMPATIBLE WITH THE STEINER MPS.

This plate is made specifically for the Trijicon RMR optic footprint. It comes with the adapter plate, a set of screws to mount the plate to your AOS milled slide, and a pair of screws to mount the optic to the plate.

 

AOS Trijicon® RMR Plate sold as a single plate in either Rear Iron Forward of the RMR or Rear Iron Behind the RMR

Includes fasteners for the adapter plate and optic.

Recommended Torque Specs for Plate Screws: 8-10 inch lbs with a tiny bit of blue loctite.

Recommended Torque Specs for Optic Screws: 10-12 inch lbs with a tiny bit of blue loctite.

Please note: While the 507C/508T have the same footprint as the Trijicon RMR, it utilizes shorter fasteners. If you are purchasing this plate to install on a 507C/508T, you will need to purchase shorter screws here

This plate is made specifically for the Deltapoint Pro optic footprint. It comes with the adapter plate, a set of screws to mount the plate to your AOS milled slide, and a pair of screws to mount the optic to the plate.

 

AOS Leupold DeltaPoint Pro (DPP) Plate sold as a single plate in either Rear Iron Forward of the DPP or Rear Iron Behind the DPP. The Sig P320 plate does not include a sight dovetail.

 

Includes fasteners for the adapter plate and optic.

This plate is made specifically for the 509T optic footprint. It comes with the adapter plate and a set of screws to mount the plate to your AOS milled slide (screws not needed to attach optic to plate, just picatinny clamp mount).

 

AOS Holosun 509T Plate sold as a single plate in either Rear Iron Forward of the RMR or Rear Iron Behind the RMR

  

Recommended Torque Specs for Plate Screws: 8-10 inch lbs with a tiny bit of blue loctite.

Recommended Torque Specs for Optic Screws: 10-12 inch lbs with a tiny bit of blue loctite.

This plate is made specifically for the Shield RMS optic footprint. It comes with the adapter plate, a set of screws to mount the plate to your AOS milled slide, and a pair of screws to mount the optic to the plate.

 

AOS Shield Optics RMS Plate sold as a single plate in either Rear Iron Forward of the RMS or Rear Iron Behind the RMS

 

Recommended Torque Specs for Plate Screws: 8-10 inch lbs with a tiny bit of blue loctite.

Recommended Torque Specs for Optic Screws: 10-12 inch lbs with a tiny bit of blue loctite.

This plate is made specifically for the Viper optic footprint. It comes with the adapter plate, a set of screws to mount the plate to your AOS milled slide, and a pair of screws to mount the optic to the plate.

 

AOS Vortex Viper Plate sold as a single plate in either Rear Iron Forward of the Viper or Rear Iron Behind the Viper